Configuration: Menus

Export Menu

Rotate Object On Export

Can be Enabled or Disabled according to your preference.

Layout Menu

Auto Lift on import

Objects will be lifted off of the build-plate on import.
Can be Enabled or Disabled according to your preference.

When applying actions on 3D hollowing the following settings can be set.

Hollowing action when merging object
- Delete Hollowing before merging the 3D models
- Applying hollowing as part of the 3D model
- Apply 3D Hollowing parameters of the first selected object
Hollowing action when cutting objects
- Delete the 3D Hollowing before using the tool
- Apply the 3D Hollowing to the model
Hollowing action when splitting object parts
- Delete the 3D Hollowing before using the tool
- Apply the 3D Hollowing to the model

Preview Menu

Move slice with left click on object

When you’re in the Export Tab. Press and hold Left click and drag your mouse up and down to quickly move the layer slider up and down.
Can be Enabled or Disabled according to your preference.

Support Menu (Resin)

Overhang angle

Adjust the angle when the Overhang pattern will be textured on the object.
- A higher value will require a greater overhang angle to trigger the texture.

Safe distance with object

The distance in millimetres a support can be placed in proximity to an object.
The minimum value is 0.5mm maxim 2.0mm.

Z limit for adaptive base

Sets the minimum height in millimetres the supported object must be for the adaptive base to trigger.
The minimum value is 0mm maxim 100mm.

Adaptive base offset

Sets a minimum distance in millimetres between the edge of the adaptive base and the object being supported. A lower number will allow the adaptive base to clip closer to the object.
The minimum value is 0.5mm maxim 3.0mm.

Use right-click to change the clipping plane position

When you’re in the Prepare Tab. Press and hold Left click on the object and drag your mouse up and down to quickly move the layer slider up and down.
- Default function is to Rotate the the Camera.
Can be Enabled or Disabled according to your preference.

Add a raft automatically when creating an object

Automatically adds the Shape Wall raft on an object imported into a Lychee Scene.
Can be Enabled or Disabled according to your preference.

Show Overhang area when there are Islands

Set to ON the overhang checkerboard pattern will still show on the model when islands are being displayed.
Can be Enabled or Disabled according to your preference.

Select Support when added

The last support placed will always be selected.
Can be Enabled or Disabled according to your preference.

Show support line when hidden

When supports are hidden, a line representing the path of the support will be displayed.
Can be Enabled or Disabled according to your preference.

Show bottom bar

Enable or Disable the shortcut Help Bar when placing supports.

Ball shape for real-time supports in error

Displays a tiny globe and not the cone type shape when you try to add a support on a location that prevents you from adding this support.
Can be Enabled or Disabled according to your preference.

Layer preview in printer resolution (pixel perfect)

Renders the preview of each layer as they will be printed pixel by pixel.

Advanced Editing Limit mode

Adjust how support nodes (the blue dots that represent the knuckles of the support) react with each other on the Z axis.
Stop
- A higher node can’t be moved to a lower Z axis than its predecessor.
Cascade
- As you drag a higher node to a lower Z axis than its predecessor, the predecessor will automatically lower so always stay below its Z height.

Support Menu (Filament)